GolfHos

Any interest in a little PIF karmic activity here?  I have some crap I could offer up.


[ObDisclaimer: I don't run a "clubmaking business"; I'm just looking to give away some crap I bought and maybe get some crap that someone else bought.  Please don't report me to the mods for competing with our fine sponsors.]

Sorry, I don't do v1.  Work out the bugs and give me a ring.

A PIF thread might be cool. I don't have a lot to offer at the moment, I gave all I had in surplus to the tattoou2 Christmas fund (unless you know any lefties with small hands), nor do I really need anything, but it might be nice to see what kind of Karma we could spread among our fellow golfhos.

[Some subfolders within the PIF thread might be nice though.  ;)]

I'd be up for the cause. Since it's mid-winter I don't have a lot to offer either but I'm game for getting the ball rolling.

Okay then, I'll start-

5 black and red Nike "Swoosh" golf gloves, right hand for left-handed golfers, size small.

Maltby M Series forged 50° wedge (I'm told it's bent to 51° but I don't have a loft gauge so I am unable to check). Chrome finish, FST Pro-Black shaft, Lamkin Crossline black grip. Easy 9/10 condition. Gone.

$5 for shipping gets either. $7 for shipping nabs both.

I have some stuff too.

Let's not all blow our wads in the first hour.

Are there many clubmakers/tinkerers here?

There are a few, but I don't know how many. I the ones I know for sure are you, me, dystopia, and (of course) Dyno. If there are others, I don't recall them piping up about it.

[edit] Forgot tdcoly.  :sad3:

I'm up for it.  I haven't checked my extra stuff in a while, but I should have time this weekend.

I'm sure I can dig something up - I'll check the stash this weekend.

I've got a ton of stuff to get rid of, I 'll start with these:

Nak 5 wood: Grafalloy Blue Stiff. Winn midsize grip.  I acquired this club in a trade w/Dyno a couple of years ago, so you know it's got the mad muju poon.

Mercury Pro-Kevlar stiff:  New and uncut.

Pay shipping and they are your's.

I'd like to try the Nak 5W, campy.  Let me know shipping to 28209.

Let's just say 6 bucks if that works for you.

Shoot me a PayPal address or trust me for a personal check.  Your choice.

Nice thread to bring over here. [sm_thumbsup2]

Could be worse, he could have said beta. ;) :D

Assuming it's a .335, any idea the profile and/or characteristics of the pro-kev? (I'd search, but I'm kinda lazy.)

It is .335, mid-high kick point, ~75g, pretty tip stiff, good feel. 

It is a pretty good shaft, but it's butt-ugly. 

I'll take it. I'm building a free driver for my friend, so he can't be too picky about appearance. Shipping to 84010?

Just a tinkerer, but give me a day to see what I have.

Ted

Don't be postin' up Geritolz.

(http://www.golfsmith.com/images/se2550l.jpg)
Snake Eyes forged 56*, RH. 9.5 condition, barely used (head only). It's yours for the shipping costs. gone.

No one has jumped on this? Wow.

I owe JD $10 so I can't. 

If someone is stuck on wanting matching wedges ... I have the Snake Eyes "10" (52*) forged to pair with it.  Currently on a Rifle 5.5, but I'd like to keep that shaft and will happily reshaft with DG or whatever else I have that might be of interest.

Also GONE.

JD, what shaft is in your SE wedge?

Sorry I wasn't clear, it's the head only.

I have no idea what you're talking about.

$5

OK, then my SE wedge is head-only too.


(But, for you non-clubmakers out there: I could be persuaded to shaft them up and pass them on to you.  If interested, shoot me an email and I'll see what kind of shafts I have lying around.  My supply is plentiful.)

always liked these type of threads


we have some minor stuff we dont use hanging around.  I'll post it tongiht, but I'd be willign to bet NOBODY wants any of it  LOL

Then go away.  You're serving no purpose here.

Anybody got any pay it forward clubs suitable for a young lady of 14?

I think spaceage is still using his current set, maybe when he gets some more though.

I'll have your new PC you guys bought, since you never use it anyway. :o ;) :D

 [sm_chairshot]

I just reshafted my wife's irons and have some TT L flex shafts you can have if that helps.

Do you build or do you need whole clubs?

Some more stuff to off-load:
Nak NP-1 52 degree wedge.  Head Only
Nak NP-1 60 degree wedge.  Head Only

The 52 is in 8.5-9 condition, the 60 is probably 7.5-8

Pay shipping, probably around 7-8 bucks.

I can build.  I'm looking for everything but a bag, and preferably, graphite shafts in the irons, probably even as many as three or four hybrids at the long end of the set. 

She's 'neglected' her game the past few years, but will be trying out for her golf team.

The best I can do is offer an SK Fiber TT 80 Reg Flex graphite FW shaft. I don't know for certain how much the tip has been trimmed, it was pulled from a 4 wood. I'd have to measure length but the 4 wood played to 42.5".

Also still have the Maltby gap wedge.

 :-X

the gloves...they be small or cadet small?

what are the bounces?

and I WILL get around to posting our list tonight

I don't know off the top of my head, but I believe both to be 8 degrees

IIRC, they are small, not cadet small. I'd can double check when I get home, but I'm almost certain.

ok, consider em claimed.   PM me payment info.  can do it tonight or tomorrow.
 [sm_beertoast]

According to Nakashima specs on the 2007 NX-1, the 52 is 8° and the 60 is 4°. I don't necessarily know how this would apply to these.

Adams Tight Lies 3-wood (15º I believe).  About 6.5/10 (paint is a little rough).  Re-shafted it could make a good driver for a 14 year old.

Ted

ugh, with the whole vacuum  incident, I didn't get down to the storage locker tonight for our apartment.

it will have to wait one more day.

not that anyone will want these shiite clubs anyways

I have an original 18* Quickstrike hybrid head only that is stripped of paint, but otherwise in good condition.  $4.00 shipping should cover it if anyone wants it.

They are small.

Yes, but can you tell us about the gloves?

crazy...

I have a RH 8º 8.25 launch angle SMT Spectrum with an SST pured (paid extra, sue me) AccuFlex VS339 S shaft, Golf Pride cordy grip.

The crown is in great shape, as is the shaft.

The grip has signs of wear, as does the face and sole.

Anyone would think I'd hit it a few times.   ;)

It has the massive SMT magnetic headcover with it, the one that you could warm your feet in during a blizzard.  It looks good.

Don't ask me the length, I forgot and can't be arsed to measure it, but it's less than 50" :)

Please don't ask for it if you have less than 50 posts here, I don't like you, or you have a SS in the 80s, unless you convince me it's for a good cause.  (And I can be a heartless bastard, just so you know)

Another caveat is that it used to be my baby and I'd rather keep it in my garage unused than let it end up unused in someone else's garage.

If it's not the club for you after you try it, you must post that and pay it forward again.

I will pay cheapo shipping. 

Even to the frozen North. 

Not internationally though (other than CAN), you cheeky bastards.

...lib

Cheeky bastard.

My SS is about 85, so I really need a higher lofted club with a softer shaft. I have no room for it in my garage, but I've got a place in my basement it can sit. Let me know if you're interested in dealing.

Dude, it's a driver, not a putter.

Really doubt this gather much interest, but I have a hogan baby ben clone with red/white/blue winn grip 34" which I will pay shipping for.  Or you can send Dystopia some funds to keep this place open. 

I've got:
Copperhead 13* 3 wood head.
Old set of Maxfli Tour LTD iron heads (like 845's) 3-w
Acer Wide sole heads 4-w. I have the 5 in my bag but I can pull it.
Couple of shaft pulls: VS339 Proto, Penley LS, Accuflex CAS. Apache MFS.

$4 for shipping and I'll pick up the diff. Everything is well used but still playable.

Wilson  Wild Thing 2 7w with factory graphite shaft
Something or another generico driving iron, 19*
Mizuno Blue Rage 310cc 9* with factory stiff graphite

what length/flex is the Apache MFS?

Just remembered: SK Fiber TT80 Reg flex. Pulled from 4 wood. Have no idea how much it was tipped. Probably as much as a 4 wood would generally require. I'd have to measure total length if you were interested. Pay shipping.

Loco Pro 450cc Beta Titanium forged  :)

AccuFlex Evolution stiff.  It's probably around 45", Bryant reshafted it for me, 44.5" maybe.

Lamkin Permawrap classic standard grip.

Magnetic original headcover.

It's crazy long, peaches.

Grip and shaft are as new, couple of small scuffs on the head.  No way you could tell it had been hurled downrange after a shaft break  :sad3:

Caveat: Aske has first dibs having already expressed an interest.

Sorry for the delay.It is a stiff, 41". Probably good for a 3 or 5 wood.

Okay...in honour of my "winning" the Wishon in 911's contest, I will put something here.

Left-handed Ashton X1 3W head. About 8/10 condition with head cover
It is shafted with a Merc Performance, but I will pull the head to make it easier to mail to the US. The shaft is pretty weak.

PM sent :)

Zoot...it's yours. :)

gonna throw that fish back in the pond and see if someone else wants it,ok?
if not,I will take it.
I am going to ask for something else here instead ;)

I might give this a try. SS about 100 and I can launch it high.

Snake Eyes wedges are gone. :(

Let me have your details and I'll get it in the post.

 [sm_beertoast]

18* Golfsmith Driving iron/UST Comp Tour 75 R flex in 9/10 condition.

 [sm_anon]  Sorry, Zoot.

LOL
No big deal.I am sure they went to a good home.
I just posted so others would know this and not bother the nice people who put them up in here ;)


btw,anyone have a Black Widow SW lying around? ;D

Flex/length/tipping on the VS339 and/or CAS?

Rifle spinner 5.5, w/ Lamkin Crossline Black cord. 33" tip to grip cap (pretty short, would play to probably around 34.5" depending on the hosel length of your wedge). I was told it wasn't tip trimmed, only butt trimmed. Pay shipping, it's yours.

Would this work in a pay it forward wedge re-shafting?

You mean for the Clive wedge deal? You're welcome to it if you want it. It will make a pretty short club though. That's why I'm not using it.

Yeah.  If it's too short, no prob.  I don't know what regular lengths are. [sm_anon]

Batter batter batter SWIIIINNNNGGGG batter.

Putter?

Stroh,

I was serious about the TT Lite XL's.  If you're interested, I'll measure them.

Oh, sorry Ted, I completely missed it.  Was it here, or in chat?

I had trouble seeing the screen last night through the bottom of those cans.

Are they for the wedges?

Yep.

http://www.golfhos.com/topic-2190.html

"Bone" colored "one-size-fits-all" Wishon (TWGT) hat. Doesn't fit my humongous  head. You want it? Pay shipping. ($4 should cover it.)

http://www.wishongolf.com/designs_detail.php?dKey=50&dType=access

Hat is gone.  8)

Scotty Cameron...  ;) j/k


I do have a Cleveland GunMetal 588 lob wedge 60 degrees bent to a 66 degree lie and extended 3/4".  It has a nick on the leading edge and doesn't have a grip on it.  If anyone is interested let me know. 

I will take the Wishon hat and add a new Accuflex VS339 (white) hat to this thread in honour of spaceage's humongous head. ;) ;D
shipping cost yet to be determined ;)

hey Zoot...I'll take the hat in lieu of the beer!!! ;D
DO you even have any Wishons? ;)

OK homo,you got a deal! :P
I have a Wishon.90l HL,just so you know. ;)

Zoot, I have a brand new head.  You can have it for 15.00 shipped.

hey...I got one of those coming to me!
Plus I have wishon irons...the ghetto Ravens are being put on the auction block.. ;D
You got a deal on the hat.

booooooooo on the Ravens being sold. ;)
item has been shipped out. :)

MO sent ;D